Tag Archives: windows home server

Snapshot and Full Image Backup for Windows Home Server

One of the short comings of the original 32 bit Windows Home Server (WHS) for me was the lack of any built in tools to backup the primary WHS boot drive. While using a RAID 1 boot drive would protect me from a disk drive crash, it didn’t offer the capability to “rewind” back to a former backup copy to fix a system drive corruption issue. To compound the problem, my favorite Windows disk image backup utility doesn’t support server based operating systems, presumably because they have a higher cost enterprise class version they sell into the classic server markets.

So for most of us, the problem remains on how to easily backup and restore the primary boot volume of the WHS server or upgrading the entire server hardware without losing the current WHS configuration. The good news is that backup and restore for a primary boot drive becomes significantly easier when you are running as a virtual machine. Better still, these come for free if implementing WHS on VMware’s ESXi hypervisor as illustrated in At Home with ESXi posted earlier.

Additional Backup Options Provided by a WHS ESXi Setup

With VMware ESXi, you automatically get two ways to create backups of your primary home server boot drive via the vSphere utility run from your regular PC:

  • Snapshot – takes a point in time copy of the complete WHS virtual machine on the same physical drive as the primary WHS boot image. Total time around 3 mins and take as many as you have room for on the disk.
  • Full Image Copy – the complete WHS virtual machine is copied via the network to your local PC or a network drive. Total time will be several hours depending on your network speed (70GBytes take a while to copy across home network)

Read more at System Drive Backup Options for Windows Home Server on VMware ESXi.

VMware ESXi at Home

What started out as a simple experiment to help me learn more about VMware ESX has now turned into a full blown experiment running my current Windows Home Server setup, along with two Linux servers used for an online FEAR Combat gaming server (for the kids of course) and a private WordPress website development environment running on a single Dell T110 server.

I am now able to create and tear down “server sandboxes” right next to my “leave alone” server setups (i.e. Windows Home Server) given the relative ease with which I can now create new virtual servers. More experimentation is necessary to get to streaming high definition videos which seem to struggle, but standard resolution and audio seem to work fine so far. This certainly seems like virtual servers are now well within the reach of the tekinerd and small home office type setups.

In addition to the Dell server, I also created a low cost iSCSI box using the free OpenFiler software and the VIA Artigo A2000 shoebox sized computer to expand the storage capabilities of ESX and primarily the virtual Windows Home Server which required additional storage to handle my total home PC backup requirements. Details of the final setup are included below, with a more detailed writeup on the Tekinerd Server Pages at http://tekinerd.com/server-pages/at-home-with-vmware-esxi/.

Hardware:

  • Dell T110 server (2x 160G drives in my particular setup), 2G DRAM (~$399 special at Dell)
  • VIA Artigo A2000 for the iSCSI storage box with 2x WD 500G drives (~$350 all in)

Software

  • Dell: VMware ESXi v4 (free download from VMware)
  • Dell: Client OS#1: Microsoft Windows Home Server ($99)
  • Dell: Client OS#2: OpenSUSE 11.2 ($0) setup as a FEAR Combat Server ($0)
  • Dell: Client OS#3: OpenSUSE 11.2 ($0) setup as a WordPress Development Server ($0)
  • VIA Artigo A2000: Openfiler v2.3 ($0) configured with 2 iSCSI targets (317G + 465G available)
  • Laptop: VMware vSphere Client software ($0)

Windows Home Server Rocks Literally

I just completed a fun project hooking up a dedicated low power, shoebox sized Windows Home Server to a University of California, Riverside project called QCN, or Quake Catcher Network. My home server now measures vibrations and sends the results to a central network. Very cool.

If you have a home server (or any recommended PC/laptop) and live in an area where the ground shakes a lot, you may want to take a look at using some of those cycles when your server is idle. More details on my setup and project at http://tekinerd.com/?page_id=123.

Rollback using Windows Home Server

I’ve been running a Windows Home Server for about 2 years now using a low cost VIA based home built system, and I’m very happy with it. Just a few examples of how useful it’s been:

  • I’ve used it to rescue my laptop twice from a corrupt C: drive
  • Temporarily rollback my laptop to a point 9 month earlier to find a lost email
  • Restore the family gaming machine more than once due to excessive build up of internet “plug ins”
  • Create a set of bootable images for my various test servers so I don’t have to update to the latest OS as my master CD/DVD is getting old

Though the backup capability is nice (I have a lot active PCs in my house), the real value of WHS came home to me when I needed to find some old emails from 9 months back that I thought I’d kept when upgrading my laptop from Windows XP to Vista. My home server had been configured to keep both the old XP backups I’d been making regularily up until Nov 2009, then it was keeping  a new set (under the same PC name) for the newer Vista Operating system I’d installed.

Here’s the steps I went through to get my now Windows Vista laptop temporaily reverted back to it’s Nov 2009 Windows XP state:

  1. Manual/instant backup of my current laptop
  2. Insert WHS provided Home Restore CD and reboot my laptop
  3. Let the restore program boot up (which can take up to 5 minutes….)
  4. When asked to select which machine, select the version of my laptop that contained the Nov 2009 Windows XP backup
  5. Click restore and let it run through it’s 1.5 hr process of copying everything back to my hard drive (blowing the exiting Vista copy away)
  6. Reboot the laptop back to it’s Nov 09 state and recover the needed files onto one of the WHS network directories I needed
  7. Reboot again with the Home Restore CD and restore the Vista backup I’d made earlier

A long winded process that took several hours (actually left some of it running over night on the last restore step), but it did the trick and worked pretty nicely. Of course, not as nice and instant as the Apple Time Machine (which wouldn’t have been able to go back to a prior OS install), but achieved the same functionality.